| Specifications |
| Model No. |
VCC-8115P |
| Scanning system |
PAL standard 625 lines, 25 frames/sec |
| Image sensor |
1/4"(approx. 3.6 mm x 2.7 mm)interline transfer method CCD |
| Picture elements |
Total: 537(H)x597(V),Effective:500(H)x582(V) |
| Horizontal resolution |
350 TV lines |
| Vertical resolution |
400 TV lines |
| Minimum illumination |
Approx 0.4 lux(Gain up: HI at F1.4) |
| Faceplate illumination |
0.04 lux (F1.4) |
| Video output level |
1.0 V(p-p)(75 ohms composite) |
| Video S/N ratio |
More than 52 dB |
| Backlight compensation |
ON/OFF -- SW(side)
ON=Multi-spot photometry (48-section)/Center
focus photometry -- Slide SW (side) |
| White balance |
TTL auto tracing white balance/Manual--SW(side) |
| Colour compensation |
Red,Blue -- VR(side) |
| Gain control |
High/Normal -- SW (side) |
| Lens (Vari focal) F,f |
F=1.4 to 1.8, f=2.8 to 5.8 mm |
| Lens (Vari focal) Angle view |
Horizontal:35' to 65'; Vertical: 27' to 51', Angle: 43' to 77' |
| Aperture correction |
Normal/Sharp --Slide SW(side) |
| Synchronizing system |
Internal sync./Line lock-- Slide SW(side) |
| Socket Video signal |
VIDEO OUT -- BNC (rear) |
| Socket Power supply |
24V AC,GND--3-pin terminal (rear) 12 to 15V DC,GND--2-pin terminal(rear) |
| Environmental conditions Operating |
Temperature:-10'C to 50'C(14'F to 122 'F), Humidity:within 90% RH |
| Environmental conditions Storage |
Temperature:-20'C to 70'C(-4'F to 158'F), Humidity:within 70% RH |
| Power requirement |
24V AC,50 Hz/12 to 15V DC |
| Power compsumption (approx.) |
2.5 W |
| Camera mount |
1/4"-20 UNC (top/bottom selectable) |
| Dimensions (approx.) |
56(W)x 56(H)x 143.5(D)mm [2.2(W) x 1.77(H) x 3.92(D)in.] |
| Weight (approx.) |
283 g [10 oz] |
Built-in DSP (digital signal processing) circuitry 
