| Specifications |
| Model No. |
VCB-3450P |
| Scanning system |
CCIR standard 625 lines, 25 frames/sec. |
| Image sensor |
1/3" (approx. 4.9 mm x 3.7 mm) interline transfer method CCD |
| Picture elements |
Total: 537(H) x 597(V), Effective: 500(H) x 582(V) |
| Horizontal resolution |
400 TV lines |
| Minimum illumination |
0.05 lx (F1.2) |
| Faceplate illumination |
0.04 lux (F1.4) |
| Video output level |
1.0 V (p-p) (75 , composite) |
| Video S/N ratio |
More than 50 dB |
| Backlight compensation |
Centre-zone light measuring system, ON / OFF --- Slide SW (side) |
| Gain control |
Auto gain control, always ON |
| Light control |
Optical auto iris lens / Electronic iris (indoor use) |
| Gain control |
High/Normal -- SW (side) |
| Lens mount |
CS mount |
| Flange back |
12.5 mm +-0.5 mm adjustment |
| Auto iris lens |
EI / DC / VIDEO --- Slide SW (side) |
| Auto iris output |
Brake coil: (+)10 V DC (50 mA max.) , (-) Not used Drive coil: (+) Video output (0.9 V (p-p), hi-Z), (-) GND (for video signal and DC power) |
| Lens iris level |
LEVEL: L to H --- VR (side) |
| Electronic iris |
1/50 sec to 1/100,000 sec |
| Electronic iris range |
0.05 lx to 30,000 lx (F1.2) |
| Synchronising system |
Internal sync. / Line lock --- Slide SW (side) |
| V phase adjustment |
LINE PHASE --- VR (rear) |
| Sockets Video signal |
VIDEO OUT --- BNC (rear) |
| Sockets Auto iris lens |
LENS --- 4-pin (side) |
| Sockets Power supply |
Power cord (rear) |
| Environmental conditions Operating |
Temperature: -10'C to 50'C [14'F to 122'F], Humidity: within 90% RH |
| Environmental conditions Storage |
Temperature: -20'C to 60'C [-4'F to 140'F], Humidity: within 70% RH |
| Power requirement |
220 to 240 V AC, 50 Hz |
| Power consumption (approx.) |
3.5 W |
| Camera mount |
1/4"- 20 UNC (top / bottom selectable) |
| Dimensions (approx.) |
57 (W) x 45 (H) x 109.5 (D) mm [2.2 (W) x 1.8 (H) x 4.3 (D) in.] (without lens camera & lens mounts) |
| Weight (approx.) |
490g [17.3 oz.] (without lens) |