| SPECIFICATIONS |
| Model |
LTC 0495/10 |
| CCD Type |
1/3 in. interline |
| Active Pixels |
752 x 582 (PAL) |
| Sensitivity (Full video)* |
2.4 lux |
| Sensitivity 50 IRE* |
0.59 lux / 0.08 lux (monochrome mode)* |
| Minimum illumination* |
0.24 lux / 0.038 lux (monochrome mode)* |
| Minimum Illumination with Sensup |
| |
0.024 lux / 0.0038 lux (monochrome mode)* |
| Min. Resolution |
480 TVL |
| SNR |
> 50 dB |
| Video Output |
1 Vp-p, 75 |
| Y/C Output |
Y: 1 Vp-p / C: 0.3 Vp-p |
| Synchronization |
Internal, Line lock, HV-lock and Genlock (Burst lock) selectable |
| Shutter |
Auto (1/60 (1/50) to 1/500000), fixed, flickerless, default |
| Sensitivity Up |
Off, automatic continuous up to 10x |
| Auto Black |
On, off selectable |
| Range |
32x dynamic range enhancement |
| Noise Reduction |
Auto, off selectable |
| Contour |
Sharpness enhancement level selectable |
| BLC |
Off, area and level selectable |
| Gain |
Auto (maximum level selectable to 28 dB) or fixed level selectable |
| Lens Mount |
CS (max lens protrusion 5 mm, .02 in.) |
| White Balance |
ATW (2500 - 10000 K), AWB hold, manual WB |
| VMD |
Four (4) area, sensitivity selectable |
| Alarm Output |
VMD or Bilinx |
| Alarm Input (TTL) |
Profile switching, +5 V nominal, +40 VDC max |
| Alarm Output Relay |
Max 30 VAC or +40 VDC, max 0.5 A continuous, 10 VA |
| External Sync Input |
75 or high impedance selectable |
| Cable Compensation |
Up to 1000 m (3000 ft) coax without external amplifiers (automatic setup in combination with coaxial communication) |
| Camera ID |
16-character editable string, position selectable |
| Lens Types |
Manual, DC and Video Iris auto-detect with override DC Iris drive: max 50 mA continuous Video Iris: 11.5 ฑ 0.5 VDC, max 50 mA continuous |
| Remote Control |
Bilinx coaxial communication |
| Power Consumption |
4 W |
| Power Supply |
/10 and /20 /50 and /60 |
| Dimensions (H x W x L) |
59 x 67 x 122 mm (2.28 x 2.6 x 4.8 in.) without lens |
| Weight |
450 g (0.99 lb) without lens |
| Tripod Mount |
Bottom (isolated) and top 1/4 in. 20 UNC |
| Controls |
OSD with softkey operation |